Summit Bridge
ATTENTION: The Summit Bridge Feature isn’t supported anymore by Zone4. You can use it at your own risk. We cannot...
- Home
- Timing
- Timing Equipment
- Summit Timers
Summit Timers
Summit timers are weatherproof handheld timing devices certified for use at FIS races
-
-
Using Photocell times with Chip times or Summit data
Photocells FIS sanctioned races require that a photocell be used as the primary timing device. Photocells are accurate however they... -
Connecting Summits to a ServerBox
Summit timers can be connected to the Zone4 Serverbox through an external USB modem. -
What to do when Summits are no longer communicating with your ServerBox.
If you lose communication with a summit during an event use these steps to re-establish communication. Note that Summits store... -
FIS Changes 2022-2023
Note: Oct 2022 FIS Update In mid October, after the following document was written and after our guidance went out... -
How to Synchronize FIS Timing Devices
At FIS races, it is required that all timing devices be precisely synchronized so they have the exact same running... -
Basic Summit Timer Usage
To turn a summit on press the “On” button Set the time on a summit Summits start at 00:00:00 when... -
Rechargeable Lithium AA Batteries
All Summit users operating in winter know the frustration of the low aux battery warning and accompanying beeping. Over the... -
Thermal Receipt Printers
FIS homologation: https://www.fis-ski.com/DB/information/homologated-timing-equipment.html states that the Summit SRT2000 timer must be used ‘with external printer’. So in order to be...